|
Search:
Advanced search
|
Browse by category:
|
Glossary | Contact Us |
| Sub Categories | |||||
 |
Take Up System 48/64 (3) Automatic Take Up Systems
|
|
Media Feed (4) |
|
Media (9) |
|
Ink and Ink Cartidges (8) |
|
Nozzles/Head (3) |
|
Firmware (3) Installing and Updating Printer Firmware
|
|
VJ 1608 Hybrid |
||||
|
Showing: 1-10 of 40 »»
Articles
|
||||||
 |
Printer moves the media in and out before printing
Turn off "Prevent Stick" in the printer menu
Set Up:
Set 10 Prevent Stick = off
|
|||||
|
||||||
|
Why do my prints have a sine wave pattern as the ink is laid down?
The new ValueJet printers incorporates a new printing technique called Intelligent Interweaving or "I²". This function is a...
|
|||||
|
||||||
|
Can I print using the USB type connector on my ValueJet
While some customers report being able to print through the USB port, it is not currently actively supported and the protocol may change...
|
|||||
|
||||||
|
I am getting headstrikes on my media
Headstrikes are when the head drags across the media and either smears the printed image or smears ink from the bottom of head on to the media.
...
|
|||||
|
||||||
|
There is no Parallel printer port on the VJ-1204. How do I update firmware?
Firmware procedure is located here:
The ValueJet incorporates a newer operating system which allows us to use newer technology...
|
|||||
|
||||||
|
I can see the wave in some of my prints. PF Adjust, Page Feed Adjust
If you have a good media and a good profile the problem is usually PF adjustment.
You will probably need to perform the PF (page feed)...
|
|||||
|
||||||
|
How do I upgrade my firmware to the latest version?
Please Read and Review this entire process before attempting a firmware upgrade.
Download the Mutoh Maintenance Engineer to your computer desktop...
|
|||||
|
||||||
|
My ValueJet prints a black line on both edges of the media, how do I turn this off.
The function is called "Flushing"
This is a firing of the nozzles on each pass of the carriage.
Go to "Set Up" in the...
|
|||||
|
||||||
|
I have seen the speed variance chart you have on the different Wave modes, however there is no documentation on your site, or manuals, regarding the technical differences between your Wave modes.
One of the measured speed charts is here:
The actual technical specs of the wave modes are currently proprietary.
Practically speaking the...
|
|||||
|
||||||
|
What temperature settings should I use for my Printer?
Good starting points for the ValueJet printers are 40/42/50.
40 preheat
42 platen heat
50 dry
Papers and some fabrics that tend to 'bleed' out...
|
|||||
|
||||||
Powered by
KBPublisher (Knowledge base software)