|
Search:
Advanced search
|
Browse by category:
|
Glossary | Contact Us |
|
Showing: 1-8 of 8
Articles
|
||||||
 |
440 ml smart chip cartridges for Toucan LT/Falcon II Outdoor printers
Toucan LT printers using smart chipped 440ml cartridges are fully functional as of firmware version 2.10.
NOTE:
• Smart chips for 220ml and...
|
|||||
|
||||||
|
I am getting headstrikes on my media
Headstrikes are when the head drags across the media and either smears the printed image or smears ink from the bottom of head on to the media.
...
|
|||||
|
||||||
|
How do I use the I2 interweave on the Toucan LT (Rockhopper 2k Plus) printers?
To install:
To drive from Onyx:
To drive from SAI:
Please note: on ALL newer version of firmware (above 2.12) wave...
|
|||||
|
||||||
|
Where to find the current firmware?
Current firmware for Toucan LT can be found in the following link...
|
|||||
|
||||||
|
How do update firmware to the latest version for my Toucan LT?
Please Read and Review this entire process before attempting a firmware upgrade.
A different version of this procedure with illustrations is...
|
|||||
|
||||||
|
I have ink dripping on my prints.
The most common cause of ink drips are small hairs or fibers that stick to the edge of the head or the carriage.
This is resolved by cleaning the...
|
|||||
|
||||||
|
I have banding on my Toucan LT, how do I calibrate the Distance Adjustment.
Download the Media Optimization Guide and for the Toucan LT here:
Under Test Files
Unzip the contents of the...
|
|||||
|
||||||
|
A couple of the heads need sucking through the capping station before every run. We also need to run color blocks to get everything printing right. Capping station seems to be sealing otherwise we couldnt suck the ink through. What should we look at. We do most of our own service.
Russ Brewer
Sounds like dampers or an air leak in the line.
|
|||||
|
||||||
Powered by
KBPublisher (Knowledge base software)