Mutoh logo Mutoh America Knowledgebase
Search:     Advanced search
Browse by category:
Glossary | Contact Us

Can I print using the USB type connector on my ValueJet

Add comment
Views: 11707
Votes: 1
Comments: 0
Posted: 20 Jun, 2007
by: Admin A.
Updated: 05 Mar, 2008
by: Anderson R.

 While some customers report being able to print through the USB port, it is not currently actively supported and the protocol may change in the future.  Mutoh has not released any Window drivers for the ValueJets and unexpected results may occur.

The printer should be connected using a network connector (Cat 5)

Others in this Category
document Have a Valuejet 1204... Just got the message to swap out waste pads.....but when i pulled out the tray i noticed that there was barely any ink collected on the pads......? This isn't normal is it?
document USB....I am running a Vista computer with Flexisign 8.5 and a Valuejet 1604. When I Rip and Print anything over 12 inches long the software doesn't send the whole job and the printer stops printing. My dealer told me that I either had to get an XP computer or install USB drivers and run my machine on the USB port instead of the Ethernet port. I read on your site not to use the USB ports, so what do I need to do.
document I change the "Mode" in my RIP and my colors are different.
document What temperature settings should I use for my Printer?
document USB Connect Procedure for ValueJets with Vista disconnect problems.
document ValueJet On-Line Manuals
document I have seen the speed variance chart you have on the different Wave modes, however there is no documentation on your site, or manuals, regarding the technical differences between your Wave modes.
document The ValueJet 1304 driver is not available for install in my RIP
document My ValueJet prints a black line on both edges of the media, how do I turn this off.
document Ink Types - Dye Sublimation
» More articles



RSS