Cut Commands Commands: Velocity, Acceleration And Force

Mutoh Cutters come defaulted to 'ACCEPT'  velocity, acceleration and force commands from the host software. If your application software has the ability to control these functions, the software will ALWAYS override the hardware settings as long as the cutter is set to 'ACCEPT'.  If your software is capable of controlling these functions, you can usually set the parameters for velocity, acceleration and force in the cut manager just prior to executing the cut. If you are not sure, contact you software provider's technical support line.

Note: While it is possible to set the Mutoh Cutter to 'IGNORE' these commands from the software, we don't recommend it.   This feature can be used to test the cutting accuracy if you are experiencing cut quality problems.