Recommendations For Materials

Although your Mutoh cutter is capable of very high cutting speeds and accelerations, you must adjust to the material conditions. Use the following chart to help you adjust your Mutoh cutter to the material (media) conditions.

Media Type	Knife (degrees)	Force (g)	Speed (cm/sec)	Acceleration (G)	Offset (mm)
2 mil High Performance Cast Vinyl	45°	40 - 130	45 - 90	3.0	0.48 - 0.58
3 mil Intermediate Vinyl	45°	40 - 130	45 - 90	3.0	0.48 - 0.58
4 mil Calandered Vinyl	45°	40 - 130	45 - 90	3.0	0.48 - 0.58
> 5.9 mil Reflective w/o Aluminum	60°	50 - 100	10 - 60	0.5 - 2.0	0.48 - 0.58
> 5.9 mil Reflective w/ Aluminum	60°	80 - 175	5 - 30	0.5 - 1.5	0.48 - 0.58
7.87 mil - 31.5 mil Sandblast Stencil	60°	80 - 350	5 - 45	0.5	0.48 - 0.58
Rubylith / Amberlith	30° - 60°	40 - 100	45 - 90	1.5 - 3.0	0.48 - 0.58