This section explains the names and functions of each part.

2.2.1 Front section

$graphics\VJ1304WA200A.gif$

No.

Name

Function

Media loading lever

Used for fixing or releasing media.

Operation panel

Operation condition setting, printer display and various function settings are performed.

Front cover

Used for preventing a user from coming in contact with the driving mechanism during the printer operation.
Opened and closed when media is set or jammed.
It is normally closed.

Stand

Used when installing the printer on a level floor.

Book holder

Quick reference manual etc. can be stored here.

Media guide

Used for feeding media smoothly when the media is set or printed.

Media cut groove

Used to cut media straight.

Pressurizing rollers

Installed inside of the front cover.
Press and hold the media when printing.

Platen

Installed inside of the front cover.
Steady the printing surface of the media.

Maintenance cover

Engineer opens and closes it when maintaining.
It is closed normally.

2.2.2 Rear section

$graphics\VJ1304WA201A.gif$

No.

Name

Function

AC inlet

Used for connecting the power cable.

Network interface connector

Connects a network interface cable.

Scroller receiver

Set the scroller when roll media is used.

Media feed slot

Used for feeding media.

Ink cartridge slot

Insert the ink cartridge.

Media guide

Used for feeding media smoothly when the media is set or printed.

Waste fluid tank

Used for collecting waste ink discharged from the printer.

Waste fluid valve

Open and close when discharging the waste fluid from the waste fluid tank.
It is normally closed.

2.2.3 Operation panel

Used for setting operation conditions, display of printer status and various functions.
Names of each operation key and status display along with the functions are explained.

•

Refer to the following for details regarding the operation method of the operation panel.

•	When performing menu setting from the operation panel: $graphics\nzilg007.gif$ 4.3 Menu setups on the operation panel
•	When performing various operations in the operation panel: $graphics\nzilg007.gif$ 4.4 Operating from the operation panel

$graphics\VJ1604W1P000J.gif$

(1) Operation keys

•	The operation keys are assigned with different functions and names depending on printer status (Normal or Setup menu display). For details about printer status, refer to "2.3 Printer status".

No.

Name

Normal

Setup menu display

[Menu] key

Shifts to the Setup menu.

Shifts from Setup menu display to Normal.

[Enter] key

Restarts printing during printing.

•	The menu to set is selected and it shifts to the next hierarchy.
•	The setting is determined and saved.

[Cleaning] key

Press and hold this key for two seconds or more to clean the print head.

—

[Cancel] key

•	When printing: Forcefully terminates printing and deletes one file of the remaining data.
•	When receiving or analyzing: Deletes data that are already received and analyzed, and delete the next data.

•	Returns to the previous menu hierarchy. Changes made in the setting are discarded.
•	Shifts from Setup menu display to Normal.

[Cut] key

If the roll media is set, cut the roll media in a media position at the time.

—

[<] key

—

The following menu changes the set value.

•	Origin menu

[Nozzle Check] key

Press and hold this key for two seconds or more to perform Nozzle Check printing.

—

[>] key

Sets Cleaning Mode.

•	The lamp of Cleaning Mode that you set lights up in green.

Down the menu level in the directory tree.

[Backward↑] key

Media is fed in the reverse direction.

—

[+] key

—

•	Changes to the previous item in the displayed menu.
•	The setting is changed to the forward direction.
•	The numeric value is increased during numerical input.

[Forward↓] key

Media is fed in the forward direction.

—

[-] key

Pause to print during printing.

•	Changes to the previous item in the displayed setting.
•	The setting is changed to the reverse direction.
•	The numeric value is decreased during numerical input.

[Power] key

Turns the printer ON and OFF.

(2) Display section

No.

Name

Color

Status

Description

Power lamp

Green

Lamp ON

Power ON.

Lamp blinks

An error has occurred.
Error content is displayed on the LCD.

Lamp OFF

Power OFF.

Data lamp

Orange

Lamp ON

•	Analyzing received data.
•	Under printing.

Lamp blinks

Receiving data.

Lamp OFF

Data is not received and analyzed.

High lamp

Green

Lamp ON

The head height is set to High.

Lamp OFF

The head height is set to Low.

Low lamp

Green

Lamp ON

The head height is set to Low.

Lamp OFF

The head height is set to High.

Wave lamp

Green

Lamp ON

•	The Effect menu is set to Wave or Fuzz.
•	When the Fine &S.Fine lamp is turned ON, the Effect menu is set to Fine &Wave or Fine &Fuzz.

Lamp OFF

The Effect menu is set to None.

Fine &S.Fine lamp

Green

Lamp ON

The Effect menu is set to Wow, Fine & Wave or Fine & Fuzz.

Lamp OFF

•	When the Wave lamp is turned ON, the Effect menu is set to Wave or Fuzz.
•	When the Wave lamp is turned OFF, the Effect menu is set to None.

Strong lamp

Green

Lamp ON

•	Cleaning Mode is set to Long.
•	When the Normal lamp is also turned on, Cleaning Mode is set to Short.

Lamp OFF

Cleaning Mode is set to Normal.

Normal lamp

Green

Lamp ON

•	Cleaning Mode is set to Normal.
•	When the Strong lamp is also turned on, Cleaning Mode is set to Short.

Lamp OFF

Cleaning Mode is set to Long.

LCD display section

—

Displays operation status of the printer or an error message.

•	When an error requiring a restart (fatal malfunction for the printer operation) occurs, all lamps blink with an alarm. $graphics\nzilg007.gif$ 7.2.5 Error requiring restart If the error persists even when the malfunction is fixed, contact your local MUTOH dealer.