The following flow chart illustrates the procedure for drawing with the printer.
Refer to each section as required.

1. Create print data.
Create print data with application software.

↓

          2. Turn the power ON and set the media.
           $graphics\nzilg007.gif$ 3.4 Setting media
           $graphics\nzilg007.gif$ 4.2 Media

↓

3. Set up printing conditions.
$graphics\nzilg007.gif$ 4.3 Menu setups on the operation panel

↓

4. Perform the printing.
$graphics\nzilg007.gif$ 4.4 Operating from the operation panel

•	Do not open the front cover during printing. If the front cover is opened, printing will be interrupted. Printing restarts if you close the front cover. However, you are not guaranteed to have high print quality.