Various settings of the printer are configured.

Setup item

Description

MediaType

Settings for the media type to print are configured.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.1 MediaType menu

Effect

Sets up the Effect menu.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.2 Effect menu

Spitting

Sets up the Spitting operation while printing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.3 Spitting menu

Side Margin

Specifies the right and left margins of printed media.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.4 Side Margin menu

Media set

Switches over the roll media and the cut media, and sets the media detection method.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.5 Media setup menu

Media Width/MediaWidth Check

Specifies the media width between the loading mark and the left end if media detection is not performed during media initialization.

Displays the detected media width if media detection is performed during media initialization.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.6 Media Width/MediaWidth check menu

Take-up

Set the operation of the optional winding unit.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.7 Winding unit menu

Origin

Sets the beginning of printing (origin) of the print data.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.8 Origin menu

MediaCut

Sets the media cutting operations after finishing printing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.9 Media cut menu

Head Travel

Sets up the range that the print head moves while printing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.10 Head Travel menu

Multi Strike

Sets up the overwrite count per line.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.11 Multi Strike menu

Strike Wait

Sets up the waiting time while overwrite printing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.12 Strike Wait menu

Slant Check

Sets up slanting detection during media loading.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.13 Slant Check menu

Auto Cleaning

Sets up the time for auto cleaning during printing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.14 Auto Cleaning menu

Ink Status

Displays information (ink status) of ink cartridge installed in the ink cartridge slot.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.15 Ink Status menu

Roll Length

Sets up the roll media length.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.16 Roll Length menu

Longstore

Performs Head washing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.17 Longstore menu

CR Maintenance

Performs maintenance.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.18 CR Maintenance menu

Initialization

Returns the settings of the printer to default.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.19 Initialization menu

Life Times

Displays the operational life time of each part.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.20 Life Times menu

IP Address

Sets the IP address of the printer.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.21 IP Address menu

Subnet Mask

Sets the subnet mask of the printer.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.22 Subnet Mask menu

Gateway

Sets the gateway.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.23 Gateway menu

Front Treatment

Set the front treatment function.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.24 Front Treatment menu

Cut Error Check

Set the cut error check function.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.25 Cut Error Check menu

Temporary

Displays the settings of "Off" or "ALL Off" in the Selection menu in the Setup menu temporarily.

•	[Enter] key: returns to the previous menu with all set up items displayed.
•	[Cancel] key: returns to the previous status in the Selection menu when the Setup menu is displayed. $graphics\nzilg007.gif$ 5.5 Selection menu

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5 Panel setup menu

5.1.1 MediaType menu

Settings for the media type to print are configured.

Setup item

Setting

Description

Media

Type 1

Settings for the media type to print are configured.
It is possible to set 30 different user settings as "Type 1 to 30" for printing.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

Type 2

…

Type 29

Type 30

—

•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.1.1 User media menu

Various settings on the user media are configured.
In the User media menu, 30 different settings can be set as "Type 1 to 30" for the following printing operation.

•

If media other than recommended one (user media) is used, the following problems may occur.

•	Media detection error
•	Slant, snag and wrinkle of media
•	Media jams
•	Favorable print quality cannot be obtained due to blots, blurs or dirt of ink.
•	End detection of roll media cannot be performed, etc.

The problems caused by the use of user media will not be covered by the warranty and repair expenses will be paid by the customer.
For details, contact your local MUTOH dealer.

Setup item

Setting

Description

Type 1 to 30

Print Mode

Sets up the print mode according to the usage of print data or print speed.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.1.1.1 Print Mode menu

PF Adjust

Sets up various settings on the Media feed compensation.

•	[>] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

Vacuum Fan

Sets up vacuum fan operation.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.1.1.3 Vacuum Fan menu

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1 MediaType menu

5.1.1.1.1 Print Mode menu

Settings for print quality (print mode) are set according to the usage of print data or print speed.

•	When "Banner 1" is set in the Print Mode menu, "PalettePrint" is not displayed in the Test Print menu. $graphics\nzilg007.gif$ 5.2 Test Print Menu

Setup item

Setting

Description

Mode

Quality 1

Sets up print mode.

•	Quality 1 to 4: Sets up to perform high quality printing.

•	Graphics 1 to 2: Sets up to perform standard printing.
•	Banner 1 to 2: Sets up to perform high speed printing.

Displays details of each print mode while pressing [>] key.
$graphics\nzilg007.gif$ Details of print mode

Quality 2

Quality 3

Quality 4

Graphics 1

Banner 1

Banner 2

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

Details of print mode

The settings for print quality registered in each print mode are as follows.

Print Mode

Resolution

Print speed

Pass

Direction

Quality 1

1440×1440 dpi

Q (high quality)

16 times

Uni (unilateral)

Quality 2

1440×1440 dpi

Q (high quality)

16 times

Bi (bidirectional)

Quality 3

720×720 dpi

Q (high quality)

8 times

Uni (unilateral)

Quality 4

720×720 dpi

Q (high quality)

8 times

Bi (bidirectional)

Graphics 1

720×720 dpi

N (normal)

8 times

Uni (unilateral)

Graphics 2

720×720 dpi

N (normal)

8 times

Bi (bidirectional)

Banner 1

540×720 dpi

N (normal)

6 times

Bi (bidirectional)

Banner 2

720×720 dpi

N (normal)

4 times

Bi (bidirectional)

5.1.1.1.2 Dist.Adj menu

Sets up various settings on the Media feed compensation.

Setup item

Setting

Description

Initial Print

Performs initial adjust print.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ (1) Initial Print menu

Initial Change

Sets up Initial Adjust Change.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ (2) Initial Change menu

Confirm Print

Performs Confirm Print.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ (3) Confirm Print menu

Micro Print

Performs Micro Adjustment Print.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ (4) Micro Print menu

Micro Change

Sets up Micro Adjustment Change.

•	[Enter] key: shifts to the sub menu. $graphics\nzilg007.gif$ (5) Micro Change menu

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

(1) Initial Print menu

Performs initial adjust print.

Setup item

Setting

Description

Feed Length

100 mm to <250 mm> to 500 mm

Changes the length (feed length) of the media feed direction for initial adjust print.

•	[Enter] key: Determines the setting. "Printing" is displayed on the operation panel and initial adjust print starts. After printing, the printer enters Normal.

—

•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

(2) Initial Change menu

Sets up Initial Adjust Change.

Setup item

Setting

Description

Init.

200.0 mm to <250.0 mm> to 300.0 mm

Sets up Initial Adjust Change.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

(3) Confirm Print menu

Performs Confirm Print.

Setup item

Setting

Description

Feed Length

100 mm to <250 mm> to 500 mm

Changes the length (feed length) of the media feed direction for Confirm Print.

•	[Enter] key: Determines the setting. "Printing" is displayed on the operation panel and initial adjust print starts. After printing, the printer enters Normal.

—

•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

(4) Micro Print menu

Performs Micro Adjustment Print.

Setup item

Setting

Description

Micro Print

Printing

Prints the following PF pattern (micro adjustment) with a focus on the micro adjustment value.

•	Printing interval: ±1 pulse

—

•	[Cancel] key: shifts to the previous menu. Stops printing and returns to the previous menu if printing is in progress. $graphics\nzilg007.gif$ 5.1 Setup menu

(5) Micro Change menu

Sets up Micro Adjustment Change.

Setup item

Setting

Description

Micro Change

–20 pulse to <0 pulse> to 20 pulse

Sets up Micro Adjustment Change.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.1.1.3 Vacuum Fan menu

Sets up vacuum fan operation.

Setup item

Setting

Description

Vacuum Fan

Low

Set when there is a possibility of a paper jam caused by failure in media loading when using soft media.

<High>

Set when using general media.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

5.1.2 Effect menu

Sets up the Effect menu.
Set up this menu when you want to improve print quality by adjusting the set print mode.

•	The print quality may not be improved depending on the printing condition.

Setup item

Setting

Description

Effect

None 1

The Effect function is not used.
If obvious white lines or uneven print density appear on printed media in "None 1", set to "None 2".

None 2

Wave 1

The printing joint will be the wave form.
It will be improved the print quality.
If obvious white lines or uneven print density appear on printed media in "Wave 1", set to "Wave 2".

Wave 2

Fuzz 1

The printing joint will shade off as the wave form.
Set up this menu when obvious white lines or uneven print density appear on printed media in "Wave".
If obvious white lines or uneven print density appear on printed media in "Fuzz 1", set to "Fuzz 2".

Fuzz 2

Wow 1

Set when colors become irregular.
If irregular colors are not fixed using "Wow1", set to "Wow2".

Wow 2

<Fine&Wave 1>

Perform printing at a slow speed compared with "Wave".
Set up this menu when improving the print quality compared with "Wave".
If obvious white lines or uneven print density appear on printed media in "Fine&Wave 1", change the setting to the one with the best print result in "Fine&Wave 2".

Fine&Wave 2

Fine&Fuzz 1

Perform printing at a slow speed compared with "Fuzz".
Set up this menu when improving the print quality compared with "Fuzz".
If obvious white lines or uneven print density appear on printed media in "Fine&Fuzz 1", change the setting to the one with the best print result in "Fine&Fuzz 2".

Fine&Fuzz 2

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.3 Spitting menu

Sets up the Spitting operation while printing.

Setup item

Setting

Description

Spitting

Origin

Perform the spitting operation to return to the original flushing box every time the print head goes and returns.

•	[Enter] key: saves the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

Perform the spitting operation on the page margins.
Improve the print quality since returning to the original flushing box.

•	[Enter] key: saves the setting and shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.3.1 Spitting pass count menu

—

•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.3.1 Spitting pass count menu

Set the frequency (spitting pass count) that the print head returns to the original flushing box when setting "On Media" in the Spitting menu.

•	When increasing the spitting pass count, clogging may occur while printing continuously.
•	If you set the spitting pass count to "0 time or less", the nozzle will become easily clogged because spitting is not performed over the media. In this instance, print quality cannot be guaranteed.

Setup item

Setting

Description

Pass Count

–999 times to 0 time to <5 times> to 999 times

Set the spitting pass count.
Example

•	-1 time: return to the flushing box on the original side every time the print head goes and returns. Spitting is not performed over the media.
•	0 time: the print head goes and returns until printing finishes, and does not return to the flushing box. Spitting is not performed over the media.
•	1 time: return to the flushing box on the original side every time the print head goes and returns.
•	5 times: return to the flushing box on the original side every 5 times the print head goes and returns five times.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.3 Spitting menu

5.1.4 Side Margin menu

Set up the right and left margins (side margins) while printing.

•	When setting "On Media" in the Spitting menu, the value of the Side Margin menu is disabled and the margin to perform the spitting operation is set automatically. $graphics\nzilg007.gif$ 5.1.3 Spitting menu

Setup item

Setting

Description

Side Margin

<3 mm> to 25 mm

Set the side margins.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.5 Media setup menu

Switches over the roll media and the cut media, and sets the media detection method.

Setup item

Setting

Description

Media set

<Roll>

Sets when using the roll media.

•	[Enter] key: shifts to the roll media detection menu. $graphics\nzilg007.gif$ 5.1.5.1 Roll Media Detection menu

cut

Sets when using the cut media.

•	[Enter] key: shifts to the cut media detection menu. $graphics\nzilg007.gif$ 5.1.5.2 Cut Media Detection menu

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.5.1 Roll Media Detection menu

Sets the media detection method when initializing the media if the media setup menu is set to "Roll media".

•	Set the media width that is set in the Media Width menu when setting "Off" in the Media detection menu. $graphics\nzilg007.gif$ 5.1.6 Media Width/MediaWidth check menu

Setup item

Setting

Description

Init.

Off

The media is not detected.

Top&Width

Detect the media width and edge while initializing the media.

<Width>

Detect the media width while initializing the media.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.5 Media setup menu

5.1.5.2 Cut Media Detection menu

Sets the media detection method when initializing the media if the media setup menu is set to "Cut media".

•	When using the cut media except the designated media, set "Auto".

Setup item

Setting

Description

Init.

<Auto>

Detects the length and breadth of the cut media automatically.

Vert.

Set when the standard-size media is set in portrait orientation.

Hori.

Set when the standard-size media is set in landscape orientation.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.5 Media setup menu

5.1.6 Media Width/MediaWidth check menu

Set up the distance between the media loading mark and the left end if media detection is not performed when initializing the media.
$graphics\nzilg007.gif$ (1) Media Width menu

Displays the detected media width if media detection is performed during media initialization.
$graphics\nzilg007.gif$ (2) MediaWidth check menu

$graphics\VJ1304WA800A.gif$

No.

Name

Roll media

Media loading mark

Platen's raised part

Media width

(1) Media Width menu

•	If you do not conduct the media detection, the media loading mark will be the print position. If you load the media without conducting the media detection, adjust the right side of the media to the media loading mark, and the front edge of the media to the platen's raised part.
•	Setting a larger value than the media width set in the Media Width menu may cause ink to leak on the media or printer.

Setup item

Setting

Description

Media Width

182 mm to <1,000 mm> to 1,371 mm

Set the media width of the loaded media.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

(2) MediaWidth check menu

Setup item

Setting

Description

MediaWidth

**** mm

Display the media width that is detected while initializing.

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.7 Winding unit menu

Set the operation of the optional winding unit.

•	When the winding unit is not installed, please do not set to "Type 1". By doing so, the product will be unable to function properly.

•	For details about the optional winding unit, contact your local MUTOH dealer.

Setup item

Setting

Description

Take-up

<Off>

No use of winding unit.

Type 1

Set to "Type 1" to use the optional winding unit.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.8 Origin menu

Sets the beginning of printing (origin) of the print data.
Set the menu when reprinting on the margin with changing the printing data position to the printed media.

•	When the Winding unit menu is set to "Type 1", the setting for X (media feeding distance) is 0 mm to 15,000 mm. $graphics\nzilg007.gif$ 5.1.7 Winding unit menu
•	The maximum setting of Y (print head transferring distance) decreases depending on the setting of the side margin. $graphics\nzilg007.gif$ 5.1.4 Side Margin menu

Setup item

Setting

Description

Origin

•	X (media feeding distance): -15,000 mm to 15,000 mm
•	Y (print head transferring distance): 0 mm to 1,183 mm

Change the print head position and media feeding distance with the following keys.

•	[>] key: Decrease the print head transferring distance.
•	[<] key: Increase the print head transferring distance.
•	[+] key: Increase the media feeding distance.
•	[–] key: Decrease the media feeding distance.

$graphics\VJ1204A801A2.gif$

1.	Starting position
2.	Media feeding direction

•	[Enter] key: "Moving Origin Pos." is displayed on the operation panel and the print head moves to the starting position. The following contents is displayed on the operation panel.

Confirm Position→Enter

•	[Enter] key or after a certain period of time: Determines the setting. Print head returns to the original position. Save the setting and shift to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

—

•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.9 Media cut menu

This sub-section explains media cutting operations.
After printing, set auto cutting (cutting media automatically), or manual cutting (cutting media manually).

Setup item

Setting

Description

MediaCut

<Off-2 Step>

Auto cutting is not performed after printing.
When the printer is in the normal mode, press [Cut] key on the operation panel to cut the media in 2 steps.

Off-3 Step

Auto cutting is not performed after printing.
When the printer is in the normal mode, press [Cut] key on the operation panel to cut the media in 3 steps.

On-2 Step

Media is cut in 2 steps automatically after printing.
When the printer is in the normal mode, press [Cut] key on the operation panel to cut the media in 2 steps.

On-3 Step

Media is cut in 3 steps automatically after printing.
When the printer is in the normal mode, press [Cut] key on the operation panel to cut the media in 3 steps.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.10 Head Travel menu

Sets up the range that the print head moves while printing.

Setup item

Setting

Description

Head Travel

<Data>

The print head changes the range of the print data width.
Improve the print speed since decreasing the transferring range of the print head.

Machine

The print head moves from origin to the maximum paper width.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.11 Multi Strike menu

Sets up the overwrite count per line.

Setup item

Setting

Description

Multi Strike

<1 cnt> to 9 cnt

Set the overwrite count.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.12 Strike Wait menu

Sets up the waiting time while overwrite printing.

Setup item

Setting

Description

Strike Wait

<0.0 sec.> to sec. 0.1 sec. to 5.0 sec.

Set the Overwrite Wait time.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.13 Slant Check menu

Sets up slanting detection during media loading.

Setup item

Setting

Description

Slant Check

Off

Slant Check is not performed.

<On>

Slant Check is performed.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.14 Auto Cleaning menu

Configure the settings for auto cleaning.

•	The cleaning mode reflects the settings in the operation panel. $graphics\nzilg007.gif$ 6.2.3 Head cleaning

Setup item

Setting

Description

Auto Cleaning

WaitingTime

Set the value for auto-cleaning in standby mode.
$graphics\nzilg007.gif$ 5.1.14.1 Standby Auto-cleaning

PrintingTime

Set the value for auto-cleaning in printing mode.
$graphics\nzilg007.gif$ 5.1.14.2 Printing Mode Auto-cleaning

Before Print

Set the value for auto-cleaning in pre-printing mode.
$graphics\nzilg007.gif$ 5.1.14.3 Pre-printing Mode Auto-cleaning

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.14.1 Standby Auto-cleaning

Set the auto cleaning interval for standby mode.

Setup item

Setting

Description

WaitingTime

0min to <360min> to 1440min

Select the time for auto cleaning when the printer is in standby mode.

•	0min: The auto cleaning is not performed.
•	Others: Perform the head cleaning selected in Cleaning menu after the setting time has elapsed. $graphics\nzilg007.gif$ 6.2.3 Head cleaning

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.14 Auto Cleaning menu

5.1.14.2 Printing Mode Auto-cleaning

Set the auto cleaning interval for printing mode.

Setup item

Setting

Description

PrintingTime

<0min> to 180min

Select the time for auto cleaning when the printer is in printing mode.

•	0min: The auto cleaning is not performed.
•	Others: Perform the head cleaning selected in Cleaning menu after the setting time has elapsed. $graphics\nzilg007.gif$ 6.2.3 Head cleaning

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.14 Auto Cleaning menu

5.1.14.3 Pre-printing Mode Auto-cleaning

Set the value for auto-cleaning in pre-printing mode.

Setup item

Setting

Description

Before Print

<Off>

The auto cleaning is not performed.

•	Perform the head cleaning selected in the Cleaning menu before printing. $graphics\nzilg007.gif$ 6.2.3 Head cleaning

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1.14 Auto Cleaning menu

5.1.15 Ink Status menu

Display information (ink status) of ink cartridge that installed to ink cartridge slot.

•	When displaying the Ink Status menu, use the genuine ink cartridge. If you use an ink cartridge other than the genuine one, ink status is not displayed correctly.

Setup item

Setting

Description

KCMY

0 to 100 (Unit: %)

Residual ink quantity of K, C, M and Y color is displayed.

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.16 Roll Length menu

Sets up the roll media length.

Setup item

Setting

Description

Roll media

<Off>

Roll Length is not used.

•	[Enter] key: saves the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

Roll 1

Sets up the roll media length.
The Roll Length setting is set for three types as "Roll 1" to "Roll 3".

•	[Enter] key: saves the setting and shifts to the sub menu. $graphics\nzilg007.gif$ 5.1.16.1 Roll media length menu

Roll 2

Roll 3

—

•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.16.1 Roll media length menu

Sets up the roll media length.

•	When replacing the roll media, adjust the roll media length again. If the roll media length is not set, the residual quantity of roll media is not displayed correctly.

Setup item

Setting

Description

Length

1m to <30 m> to 99 m

Set the roll media length.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.17 Longstore menu

Performs Head washing.

•	Make sure to use a dedicated cleaning fluid (model No.: RJ-FGCLS*1).

Setup item

Setting

Description

Longstore

Start

Performs Head washing.

•	[Enter] key: Perform the Head washing operation. The following contents is displayed on the operation panel.

Remove Cartridges

Remove the ink cartridge, and install the cleaning cartridge.

$graphics\nzilg007.gif$ 6.1.1 Replacing ink cartridges

—

•	[Cancel] key: shifts to the previous menu without Head washing. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.18 CR Maintenance menu

Performs maintenance.
Use this to replace a blade, or clean the cleaning wiper.
$graphics\nzilg007.gif$ 6.1.3 Replacing razor blade

Setup item

Setting

Description

CR Maint.

Start

Performs maintenance.

•	[Enter] key: The print head moves to center. The cleaning wiper moves forward.

End

Completes maintenance.

•	[Enter] key: Print head returns to the original position. The cleaning wiper returns to the original position.

—

•	[Cancel] key: shifts to the previous menu without maintenance. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.19 Initialization menu

Returns the settings of the printer to default.

Setup item

Setting

Description

Initialization

ALL

All settings can be returned to factory default.

MediaType

The settings of the MediaType menu is returned to factory default.

Except MediaType

The settings value other than the MediaType menu is returned to factory default.

—

•	[Enter] key: "Initialing" is displayed on the operation panel and the printer initializes the setting.

•	[Cancel] key: shifts to the previous menu without initialization. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.20 Life Times menu

Displays the operational life time of each part.

Setup item

Setting

Description

Life Times

Head

Display the operational life of each part.

•	The operational life of a part is indicated by five asterisks (100 %).
•	As the part deteriorates, the number of asterisks decreases one by one (20 %).
•	The part should be changed when all of the asterisks have disappeared, and "Change" is displayed. Contact your local MUTOH dealer to ask for replacing parts.

Pump

CR Motor

PF Motor

—

•	[Cancel] key: shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

•

When replacing a part that its operational life has ended,

•	No charge for replacing within the warranty period or under the contract.

•	You are liable for the cost of repairs under conditions other than mentioned above.

•

Do not keep using the part which has reached its life span. Problems caused by doing so will not be covered by the warranty.

5.1.21 IP Address menu

Sets the IP address of the printer.

•	Be sure to set the IP address after consulting the network administrator.

Setup item

Setting

Description

IP Address

000.000.000.000 to
<192.168.001.253> to
255.255.255.255

Change the IP address to operate the following keys.

•	[+] key: increases the setting value.
•	[–] key: decreases the setting value.
•	[Enter] key: changes the setting for the next segment.

—

•	[Cancel] key: saves the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.22 Subnet Mask menu

Sets the subnet mask of the printer.

•	Be sure to set the subnet mask after consulting the network administrator.

Setup item

Setting

Description

Subnet Mask

000.000.000.000 to
<255.255.255.000> to
255.255.255.255

Change the subnet mask to operate the following keys.

•	[+] key: increases the setting value.
•	[–] key: decreases the setting value.
•	[Enter] key: changes the setting for the next segment.

—

•	[Cancel] key: saves the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.23 Gateway menu

Sets the gateway.

•	Be sure to set the gateway after consulting the network administrator.

Setup item

Setting

Description

Gateway

000.000.000.000 to
<192.168.001.254> to
255.255.255.255

Change the gateway to operate the following keys.

•	[+] key: increases the setting value.
•	[–] key: decreases the setting value.
•	[Enter] key: changes the setting for the next segment.

—

•	[Cancel] key: saves the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.24 Front Treatment menu

Set the front treatment function.
This function is applied when the banding appears at the beginning of print.

Setup item

Setting

Description

Front Treatment

Off

The front treatment function is not used.

<On>

The front treatment function is used.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.25 Cut Error Check menu

After the media cut operation, set up whether to conduct the media cut error check.

Setup item

Setting

Description

Cut Error Check

<On>

Conducts the media cut error check.

Off

Does not conduct the media cut error check.
After the media cut operation, "RemoveMedia -> ENTER" is displayed on the operation panel.
Remove the media from the media guide, and press the [Enter] key.

—

•	[Enter] key: saves the setting and shifts to the previous menu.
•	[Cancel] key: cancels the setting and shifts to the previous menu. $graphics\nzilg007.gif$ 5.1 Setup menu