5.5 Selection menu

Sets up the contents of the Setup menu.
You can make setup items that you do not normally use invisible.
Switch the setting "On (displayed)" to "Off (undisplayed)" using the [<] key or [>] key on the operation panel.
When the setting is On, "*" is displayed on the operation panel.

•Even if you select "Off" in the Selection menu, you can display the settings temporarily by selecting "Temporary" in the Setup menu.
graphics\nzilg007.gif5.1 Setup menu
•The following items are never displayed even when "ALL On" is selected.
•Feed
•Prev. Stick
Setup item
Setting
Description
MediaType
Off
Sets up whether to display the MediaType menu.
<On>
Effect
Off
Sets up whether to display the Effect menu.
<On>
Spitting
Off
Sets up whether to display the Spitting menu.
<On>
Side Margin
Off
Sets up whether to display the Side Margin menu.
<On>
Media set
Off
Sets up whether to display the Media setup menu.
<On>
Media Width
Off
Sets up whether to display the Media Width menu.
<On>
Take-up
<Off>
Sets up whether to display the Winding unit menu.
On
Feed
<Off>
The feed unit menu is not displayed in this printer.
Origin
Off
Sets up whether to display the Origin menu.
<On>
Prev. Stick
<Off>
This printer does not display the Prev. Stick menu.
MediaCut
Off
Sets up whether to display the Media cut menu.
<On>
Head Travel
Off
Sets up whether to display the Head Travel menu.
<On>
Multi Strike
Off
Sets up whether to display the Multi Strike menu.
<On>
Strike Wait
Off
Sets up whether to display the Strike Wait menu.
<On>
Slant Check
Off
Sets up whether to display the Slant Check menu.
<On>
Auto Cleaning
Off
Sets up whether to display the Auto Cleaning menu.
<On>
Ink Status
Off
Sets up whether to display the Ink Status menu.
<On>
Roll Length
Off
Sets up whether to display the Roll Length menu.
<On>
Longstore
Off
Sets up whether to display the Longstore menu.
<On>
CR Maintenance
Off
Sets up whether to display the CR Maintenance menu.
<On>
Initialization
Off
Sets up whether to display the Initialization menu.
<On>
Life Times
Off
Sets up whether to display the Life Times menu.
<On>
IP Address
Off
Sets up whether to display the IP Address menu.
<On>
Subnet Mask
Off
Sets up whether to display the subnet mask.
<On>
Gateway
Off
Sets up whether to display the Gateway menu.
<On>
Front Treatment
Off
Sets up whether to display the Front Treatment menu.
<On>
Cut Error Check
Off
Set up whether to display the Cut Error Check menu.
<On>
ALL On
Displays all items in the Setup menu.
•Pressing the [Enter] key displays "*" for all items in the Selection menu.
ALL Off
No items in the Setup menu are displayed.
•Pressing the [Enter] key deletes "*" for all items in the Selection menu.
•Even if you select "ALL Off", you can display the items temporarily by selecting "Temporary" in the Setup menu.

—
•[Cancel] key: saves the setting and shifts to the previous menu.
graphics\nzilg007.gif5 Panel setup menu