Perform various setup of printer.

Setup item

Description

MediaType

Set up the media type for printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1 MediaType menu

Effect

Set up the Effect menu.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.2 Effect menu

Flushing

Set up the Flushing operation while printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.3 Flushing menu

Side Margin

Set up the right and left margin when printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.4 Side Margin menu

Media Initial

Set up whether the media width and edge are detected when initializing the media.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.5 Media Initial menu

Media Width/MediaWidth

Set up the media width from the loading mark to the left end if media detection is not performed when initializing the media.

Display the detected media width if media detection is performed when initializing the media.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.6 Media Width/MediaWidth menu

Origin

Set the beginning of printing (origin) of the printing data.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.7 Origin menu

Prev. Stick

Set up to prevent from sticking when printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.8 Prev. Stick menu

CR Movement

Set up the range to move the print head while printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.9 CR Movement menu

Overwrite Cnt

Set up the Overwrite Cnt per line.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.10 Overwrite Cnt menu

Overwrite Wait

Set up the waiting time while overwrite printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.11 Overwrite Wait menu

Slant Check

Set up the slanting detection while loading the media.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.12 Slant Check menu

Auto Cleaning

Set up the auto cleaning time while printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.13 Auto Cleaning menu

Ink Status

Display information (ink status) of ink cartridge that installed to ink cartridge slot.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.14 Ink Status menu

Roll Length

Set up the roll media length.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.15 Roll Length menu

Head Wash

Perform head cleaning.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.16 Head Wash menu

CR Maintenance

Clean the cleaning wiper.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.17 CR Maintenance menu

Initialization

The setting value of the printer is returned to default.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.18 Initialization menu

Life Times

Display the operational life time of each part.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.19 Life Times menu

IP Address

Sets the IP address of the printer.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.20 IP Address menu

Subnet Mask

Sets the subnet mask of the printer.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.21 Subnet Mask menu

Gateway

Set the Gateway.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.22 Gateway menu

Temporary

The settings of "Off" or "ALL Off" in the Selection menu is displayed in the Setup menu temporarily.

•	[Enter] key: Return to the previous hierarchy with displaying all setup menu items.
•	[Cancel] key: Return to the previous status in the Selection menu. $graphics\nzilg007.gif$ 5.5 Selection menu

—

•	[Cancel] key: Shift to the previous hierarchy. $graphics\nzilg007.gif$ 5 Panel setup menu

5.1.1 MediaType menu

Set up the media type for printing.

Setup item

Setting value

Description

Media

Type 1

Set up the media type for printing.
It is possible to set 30 different user settings as "Type 1-30" for printing.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

Type 2

…

Type 29

Type 30

—

•	[Cancel] key: Save the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.1.1 User media menu

Various settings on the user media can be set.
Each setting of the following printing operation is set 30 settings in the User media menu as Type 1 to 30.

•

If media other than recommended one (user media) is used, the following problems may occur.

•	Media detection error
•	Slant, snag and wrinkle of media
•	Media jams
•	Favorable printing quality cannot be obtained due to blots, blurs and dirt of ink.
•	End detection of roll media cannot be performed, etc.

The problems caused by the use of user media will not be covered by the warranty and repair expenses will be paid by the customer.
For details, contact MUTOH local dealer.

Setup item

Setting value

Description

Type 1 to 30

Print mode

Set up the print mode according to the usage to print data or print speed.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.1 Print Mode menu

PF Adjust

Various settings on the Media feed compensation can be set.

•	[>] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

Pre Heater

Set up the Pre Heater temperature.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.3 Pre Heater menu

Platen Heater

Set up the Platen Heater temperature.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.4 Platen Heater menu

After Heater

Set up the After Heater temperature.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.5 After Heater menu

StandbyHeating

Set up whether the heater is preheated while in standby mode.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.6 StandbyHeating menu

Vacuum Fan

Set up the vacuum fan operation.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.7 Vacuum Fan menu

—

•	[Cancel] key: Shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1 MediaType menu

5.1.1.1.1 Print Mode menu

Set up the setting value about the printing quality (print mode) according to the usage to print data or print speed.

Setup item

Setting value

Description

Mode

Quality 1

Set up the print mode.

•	Quality 1 to 4: Set up to perform high quality printing.

•	Graphics 1 to 2: Set up to perform standard printing.
•	Banner 1 to 4: Set up to perform high speed printing.

Display the detail of printing mode while pressing [>] key.
$graphics\nzilg007.gif$ Details of the print mode

•	When setting "Banner 1" or "Banner 2" in the Print Mode menu, "PalettePrint" is not displayed in the Test Print menu. $graphics\nzilg007.gif$ 5.2 TestPrint Menu

Quality 2

Quality 3

Quality 4

Graphics 2

Banner 1

Banner 2

Banner 3

Banner 4

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

Details of the print mode

The setting value about printing quality to be registered in each print mode is as follows.

Print mode

Resolution

Print speed

Pass

Direction

Quality 1

1440×1440 dpi

Q (high quality)

16 times

Uni (unilateral)

Quality 2

1440×720 dpi

Q (high quality)

8 times

Uni (unilateral)

Quality 3

720×720 dpi

Q (high quality)

8 times

Uni (unilateral)

Quality 4

720×720 dpi

Q (high quality)

8 times

Bi (bidirectional)

Graphics 1

720×720 dpi

N (normal)

8 times

Uni (unilateral)

Graphics 2

720×720 dpi

N (normal)

8 times

Bi (bidirectional)

Banner 1

540×720 dpi

N (normal)

6 times

Uni (unilateral)

Banner 2

540×720 dpi

N (normal)

8 times

Bi (bidirectional)

Banner 3

720×720 dpi

Q (high quality)

4 times

Uni (unilateral)

Banner 4

720×720 dpi

N (normal)

4 times

Bi (bidirectional)

5.1.1.1.2 Dist.Adj menu

Various settings on the Media feed compensation can be set.

Setup item

Setting value

Description

Init.Adj.Print

Perform the initial adjust print.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ (1) Init.Adj.Print menu

Init.Adj.Change

Set up Initial Adjust Change.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ (2) Init.Adj.Change menu

Confirm Print

Perform the Confirm Print.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ (3) Confirm Print menu

Micro Adj. Print

Perform the Micro Adjustment Print.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ (4) Micro Adj. Print menu

Micro Adj.Change

Set up the Micro Adjustment Change.

•	[Enter] key: Shift to the next hierarchy. $graphics\nzilg007.gif$ (5) Micro Adj.Change menu

—

•	[Cancel] key: Shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

(1) Init.Adj.Print menu

Perform the initial adjust print.

Setup item

Setting value

Description

Feed Length

100 mm to <250 mm> to 500 mm

Change the length (feed length) of the media feed direction for the initial adjust print.

•	[Enter] key: The setting value is determined. "Printing" is displayed on the operation panel and initial adjust print is started. After printing, the printer becomes in the normal condition.

—

•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

(2) Init.Adj.Change menu

Set up Initial Adjust Change.

Setup item

Setting value

Description

Init.

200.0 mm to <250.0 mm> to 300.0 mm

Set up Initial Adjust Change.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

(3) Confirm Print menu

Perform the Confirm Print.

Setup item

Setting value

Description

Feed Length

100 mm to <250 mm> to 500 mm

Change the length (feed length) of the media feed direction for the Confirm Print.

•	[Enter] key: The setting value is determined. "Printing" is displayed on the operation panel and initial adjust print is started. After printing, the printer becomes in the normal condition.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1.2 Dist.Adj menu

(4) Micro Adj. Print menu

Perform the Micro Adjustment Print.

Setup item

Setting value

Description

Micro Adj. Print

Printing

Print the following PF pattern (micro adjustment) with a focus on the micro adjustment value.

•	Printing interval: ± 1 pulse

—

•	[Cancel] key: Shift to the previous hierarchy. If the printer is during printing, terminate printing and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

(5) Micro Adj.Change menu

Set up the Micro Adjustment Change.

Setup item

Setting value

Description

Micro Adj.Change

–20 pulse to <0 pulse > to 20 pulse

Set up the Micro Adjustment Change.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.1.1.3 Pre Heater menu

Set up the Pre Heater temperature.
Set up to preheat the media before printing and insulate the temperature change in the printer section.

•	Preset temperature of Pre Heater varies depending on the media. For preset temperature of Pre Heater, refer to the "Recommended media list".

Setup item

Setting value

Description

Pre Heater

Off / <30° C> to 60° C

Set up the Pre Heater temperature.

$graphics\VJ1204A802A.gif$

1.	Roll media
2.	Pre Heater
3.	Print head

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

5.1.1.1.4 Platen Heater menu

Set up the Platen Heater temperature.
Set up this menu to warm up ink and improve the printing quality.

•	Preset temperature of Platen Heater varies depending on the media. For preset temperature of Platen Heater, refer to the "Recommended media list".

Setup item

Setting value

Description

Platen Heater

Off / <30° C> to 55° C

Set up the Platen Heater temperature.

$graphics\VJ1204A803A.gif$

1.	Roll media
2.	Platen Heater
3.	Print head

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

5.1.1.1.5 After Heater menu

Set up the After Heater temperature.
Set this menu to dry printing.

•	Preset temperature of After Heater varies depending on the media. For preset temperature of After Heater, refer to the "Recommended media list".

Setup item

Setting value

Description

After Heater

Off / <30° C> to 50° C

Set up the After Heater temperature.

$graphics\VJ1204A804A.gif$

1.	Roll media
2.	After Heater
3.	Print head

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

5.1.1.1.6 StandbyHeating menu

Set up whether each heater is preheated (idle heat) while in standby mode.

Setup item

Setting value

Description

StandbyHeating

Off

Idle heat is not performed.

<On>

Idle heat is performed.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

5.1.1.1.7 Vacuum Fan menu

Set up the vacuum fan operation.

Setup item

Setting value

Description

Vacuum Fan

Low

It may cause clogging to fail media loading operation when using soft media.

<High>

Set when general media is used.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.1.1 User media menu

5.1.2 Effect menu

Set up the Effect menu.
Set up this menu when improving the printing quality to adjust the quality to the printing mode.

•	The printing quality may not be improved according to the printing condition.

Setup item

Setting value

Description

Effect

None

The Effect function is not used.

Wave

The printing joint will be the wave form.
It will be improved the printing quality.

Fine&Wave

Perform printing at a slow speed compared with "Wave".
Set up this menu when improving the printing quality compared with "Wave".

S.Fine&Wave

Perform printing at a slow speed compared with "Fine&Wave".
Set up this menu when improving the printing quality compared with "Fine&Wave".

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.3 Flushing menu

Set up the Flushing operation while printing.

Setup item

Setting value

Description

Flushing

Origin

Perform the flushing operation to return to the original flushing box every time the print head goes and returns.

•	[Enter] key: Save the setting value and shift to the previous hierarchy.

Perform the flushing operation on the page margins.
Improve the print quality since returning to the original flushing box.

•	[Enter] key: Save the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1.3.1 Flushing return count menu

—

•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.3.1 Flushing return count menu

Set the frequency (flushing return count) that the print head returns to the original flushing box when setting "On Media" in the Flushing menu.

•	When increasing the flushing return count, clogging may occur while printing continuously.

Setup item

Setting value

Description

Return count

Once to < 5 times > to 999 times

Set the flushing return count.
Example

•	Once: return to the original flushing box every time the print head goes and returns once.
•	5 times: return to the original flushing box every time the print head goes and returns five times.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.4 Side Margin menu

Set up the right and left margin (side margin) while printing.

Setup item

Setting value

Description

Count

<3 mm> to 25 mm

Set the side margin.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

•	When setting "On Media" in the Flushing menu, the value of the Side Margin menu is disabled and the margin to perform the flushing operation is set automatically. $graphics\nzilg007.gif$ 5.1.3 Flushing menu

5.1.5 Media Initial menu

Set up whether the media width and edge are detected when initializing the media.

Setup item

Setting value

Description

Init.

Off

The media is not detected.

•	Set the media width that is set in the Media Width menu when setting "Off" in the Media detection menu, $graphics\nzilg007.gif$ 5.1.6 Media Width/MediaWidth menu

Top&Width

Detect the media width and edge while initializing the media.

<Width>

Detect the media width while initializing the media.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.6 Media Width/MediaWidth menu

Set up the distance between the right end from 5 mm and the left end if media detection is not performed when initializing the media.
$graphics\nzilg007.gif$ (1) Media Width menu

Display the detected media width if media detection is performed when initializing the media.
$graphics\nzilg007.gif$ (2) MediaWidth menu

$graphics\VJ1204A800A.gif$

No.

Name

Roll media

Media Width

(1) Media Width menu

•	Setting a larger value than the media width set in the Media Width menu may cause ink to leak on the media or printer.

Setup item

Setting value

Description

Media Width

150 mm to <1,000 mm> to 1,225 mm

Set the media width.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

(2) MediaWidth menu

Setup item

Setting value

Description

MediaWidth

**** mm

Display the media width that is detected while initializing.

—

•	[Cancel] key: Shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.7 Origin menu

Set the beginning of printing (origin) of the printing data.
Set the menu when reprinting on the margin with changing the printing data position to the printed media.

Setup item

Setting value

Description

Origin

•	X (print head transferring distance): 00000 mm to 99999 mm
•	Y (media feeding distance): 00000 mm to 9,999 mm

Change the print head position and media feeding distance with the following keys.

•	[>] key: Decrease the print head transferring distance.
•	[<] key: Increase the print head transferring distance.
•	[+] key: Increase the media feeding distance.
•	[–] key: Decrease the media feeding distance.

$graphics\VJ1204A801A.gif$

1.	Starting position
2.	Media feeding direction

•	[Enter] key: Display "Moving Origin Pos.", and move the print head to the starting position. The operation panel displays the following contents.

Confirm Position→E

•	[Enter] key or after a certain period of time: The setting value is determined. Print head returns to the original position. Save the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

—

•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.8 Prev. Stick menu

Set up to prevent from sticking when printing.

Setup item

Setting value

Description

Prev. Stick

Off

The sticking operation is not performed.

<On>

The sticking operation is performed.
Feed the media back and forth to prevent from sticking.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.9 CR Movement menu

Set up the range to move the print head while printing.

Setup item

Setting value

Description

CR Movement

<Data>

The print head changes the range of the print data width.
Improve the print speed since decreasing the transferring range of the print head.

Machine

The print head moves from origin to the maximum paper width.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.10 Overwrite Cnt menu

Set up the Overwrite Cnt per line.

Setup item

Setting value

Description

Overwrite Cnt

<once> to 9 times

Set the overwrite count.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.11 Overwrite Wait menu

Set up the waiting time while overwrite printing.

•	Narrow media may not be warmed enough by the heater causing less printing quality. In this case, set the Overwrite Wait time and warm up the media.

Setup item

Setting value

Description

Overwrite Wait

<0s> to 0.1s to 5.0s

Set the Overwrite Wait time.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.12 Slant Check menu

Set up the slanting detection while loading the media.

Setup item

Setting value

Description

Slant Check

Off

Slant Check is not performed.

<On>

Slant Check is performed.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.13 Auto Cleaning menu

Set the auto cleaning interval of this printer.
Since perform the cleaning operation when turning ON the power, prevent from clogging the print head.

Setup item

Setting value

Description

Auto Cleaning

Off

The auto cleaning is not performed.

1 hours

The selected time is passed, the auto cleaning is performed.

2 hours

3 hours

4 hours

5 hours

<6 hours>

9 hours

12 hours

18 hours

24 hours

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.14 Ink Status menu

Display information (ink status) of ink cartridge that installed to ink cartridge slot.

•	When displaying the Ink Status menu, use the genuine ink cartridge. If using ink cartridge other than genuine one, the ink status is not displayed correctly.

Setup item

Setting value

Description

KCMY

0 - 100 (Unit: %)

Residual ink quantity of K, C, M and Y color is displayed.

—

•	[Cancel] key: Shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.15 Roll Length menu

Set up the roll media length.

Setup item

Setting value

Description

Roll media

<Off>

Roll Length is not used.

•	[Enter] key: Save the setting value and shift to the previous hierarchy.

Roll1

Set up the roll media length.
The Roll Length setting value is set three types as "Roll1" to "Roll3".

•	[Enter] key: Save the setting value and shift to the next hierarchy. $graphics\nzilg007.gif$ 5.1.15.1 Roll Length menu

Roll2

Roll3

—

•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.15.1 Roll Length menu

Set up the roll media length.

Setup item

Setting value

Description

Length

1m to <30m> to 99m

Set the roll media length.

•	When replacing the roll media, adjust the roll media length again. If the roll media length is not set, the residual quantity of roll media is not displayed correctly.

—

•	[Enter] key: Save the setting value and shift to the previous hierarchy.
•	[Cancel] key: Cancel the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.16 Head Wash menu

Perform head cleaning.

•	Make sure to use a dedicated cleaning fluid (model No.: VJ22-HEINK-CL).

Setup item

Setting value

Description

Head Wash

Start

Perform head cleaning.

•	[Enter] key: Perform the head cleaning operation. The operation panel displays the following contents.

Remove Cartridges

Remove the ink cartridge, and install the cleaning cartridge.

$graphics\nzilg007.gif$ 6.1.1 Replacing ink cartridges

—

•	[Cancel] key: Shift to the previous hierarchy without the head cleaning operation. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.17 CR Maintenance menu

Clean the cleaning wiper.

Setup item

Setting value

Description

CR Maintenance

Start

Clean the cleaning wiper.

•	[Enter] key: The print head moves to center. The cleaning wiper moves forward.

End

Cleaning the cleaning wiper is complete.

•	[Enter] key: Print head returns to the original position. The cleaning wiper returns to the original position.

—

•	[Cancel] key: Shift to the previous hierarchy without the cleaning wiper cleaning operation. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.18 Initialization menu

The setting value of the printer is returned to default.

Setup item

Setting value

Description

Initialization

ALL

All setting value can be returned to factory default.

MediaType

The settings of the MediaType menu is returned to factory default.

Except MediaType

The settings value other than the MediaType menu is returned to factory default.

—

•	[Enter] key: Display "Initialling" on the operation panel, and initialize the setting value.

•	[Cancel] key: Shift to the previous hierarchy without initialization. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.19 Life Times menu

Display the operational life time of each part.

Setup item

Setting value

Description

Life Times

Head

Display the operational life of each part.

•	The operational life of a part is indicated by five asterisks (100 %).
•	As the part deteriorates, the number of asterisks decreases one by one (20 %).
•	The part should be changed when all of the asterisks have disappeared, and "Change" is displayed. Ask for replacing parts. $graphics\nzilg007.gif$

Pump

CR Motor

PF Motor

—

•	[Cancel] key: Shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

•

When replacing a part that its operational life has ended,

•	no charge for replacing within the warranty period or under the contract.

•	you are liable for the cost of repairs other than those above.

•

Do not keep using the part which has reached its life span.Problems caused by doing so will not be covered by the warranty.

5.1.20 IP Address menu

Sets the IP address of the printer.

•	Be sure to set the IP address after consulting the network administrator.

Setup item

Setting value

Description

IP Address

000.000.000.000~
<192.168.001.253>~
255.255.255.255

Change the IP address to operate the following keys.

•	[+] key: Increase the setting value.
•	[–] key: Decrease the setting value.
•	[Enter] key: Change the setting value for the next segment.

—

•	[Cancel] key: Save the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.21 Subnet Mask menu

Sets the subnet mask of the printer.

•	Be sure to set the subnet mask after consulting the network administrator.

Setup item

Setting value

Description

Subnet Mask

000.000.000.000~
<255.255.255.000>~
255.255.255.255

Change the subnet mask to operate the following keys.

•	[+] key: Increase the setting value.
•	[–] key: Decrease the setting value.
•	[Enter] key: Change the setting value for the next segment.

—

•	[Cancel] key: Save the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu

5.1.22 Gateway menu

Set the Gateway.

•	Be sure to set the gateway after consulting the network administrator.

Setup item

Setting value

Description

Gateway

000.000.000.000~
<192.168.001.254>~
255.255.255.255

Change the gateway to operate the following keys.

•	[+] key: Increase the setting value.
•	[–] key: Decrease the setting value.
•	[Enter] key: Change the setting value for the next segment.

—

•	[Cancel] key: Save the setting value and shift to the previous hierarchy. $graphics\nzilg007.gif$ 5.1 Setup menu