It is used for optimizing the quality of image prints (Alignment).

Alignment must be set every printing mode.

After selected the printing mode that you want to use, follow the procedure below to perform alignment.

•	This printer was adjusted at factory shipment so that it obtains the optimum print quality. Adjust the quality if the print quality changes after the installation environment or the media is changed.

1	Turn ON the printer and load the roll media. $graphics\nzilg007.gif$ 3.4.2 Setting roll media

2	Confirm that the printer functions normally.

Display the Printing mode menu on the operation panel.

Press the [Menu] key on the operation panel.

$graphics\VJ1204P001J.gif$

•	"Menu 1: Setup>" is displayed on the operation panel.
•	The operation panel shifts to the Setup menu display.

Press the [>] key on the operation panel.

$graphics\VJ1204P008J.gif$

•	"Set1: MediaType" is displayed on the operation panel.

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	"Media: Type 1" is displayed on the operation panel.

Press the [+] key or [–] key on the operation panel to select the media type to use.

$graphics\VJ1204P003J.gif$

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	"**>1: Print Mode" is displayed on the operation panel.

•	The selected media (Type 1 to 30) is displayed in "**". $graphics\nzilg007.gif$ 5.1.1 MediaType menu

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	"Mode: Quality 1 – >" is displayed on the operation panel.
•	The display shifts to the Printing mode menu. $graphics\nzilg007.gif$ 5.1.1.1.1 Print Mode menu

Select the printing mode that you want to use.

Press the [+] key or [–] key on the operation panel to select the printing mode to use.

$graphics\VJ1204P003J.gif$

Press the [Cancel] key on the operation panel several times.

$graphics\VJ1204P005J.gif$

•	The operation panel returns to Normal.

Display the Adjust Print menu on the operation panel.

Press the [Menu] key on the operation panel.

$graphics\VJ1204P001J.gif$

•	"Menu 1: Setup>" is displayed on the operation panel.
•	The operation panel shifts to the Setup menu display.

Press the [+] key or [–] key to select "Menu3: Adjust Print>".

$graphics\VJ1204P003J.gif$

Press the [>] key on the operation panel.

$graphics\VJ1204P008J.gif$

•	"Adj.1: Confirm" is displayed on the operation panel.
•	The display enters the Adjust Print menu. $graphics\nzilg007.gif$ 5.3 Adjust Print menu

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	A confirmation pattern for quality adjustment is printed.

$graphics\VJ1204A327A.gif$

•	After the confirmation pattern is printed, "Adj.1: Confirm" is displayed on the operation panel.

Confirm that the confirmation pattern printing result is as follows.

$graphics\VJ1204A328A.gif$

a.	When the printing result is $graphics\TRUE.gif$ : You do not need perform Alignment. Proceed to step 10.

b.	When the printing result is $graphics\FALSE.gif$ : You need to perform Alignment. Proceed to step 8.

Press the [+] or [–] key on the operation panel to select "Adj.5: Bi-D Quality".

$graphics\VJ1204P003J.gif$

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	Start Bi-D Quality pattern printing.

Check the Bi-D Quality pattern printing and select the number corresponding to the lines that are most closely aligned.
"4" is selected in the next printing sample.

$graphics\VJ1204A326E.gif$

Press the [+] or [–] key to enter the number that you selected in step c.

$graphics\VJ1204P003J.gif$

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	The set value for Bi-D Quality is registered.
•	"Adjust5:Bi-D quality" is displayed on the operation panel.

9	Register the setting for Bi-D Normal (two-way printing/normal mode) in the same way as in step 8.

Press the [Cancel] key on the operation panel several times.

$graphics\VJ1204P005J.gif$

•	The operation panel returns to Normal.
•	Alignment ends.