This section explains how to turn the printer ON/OFF.

3.2.1 Turning the power ON

Follow the procedure below to turn the power ON.

Press the [Power] key on the operation panel to turn ON the printer.

•	The Power lamp on the operation panel lights up in green.

$graphics\VJ1204P013J.gif$

•	The printer starts initial operation.
•	When the initial operation is complete, the printer enters Normal.

•	If there is a problem during the initial operation, a message is displayed on the operation panel and the printer may stop operating. If operation stops, refer to "7 Troubleshooting " and deal with the problem.

3.2.2 Turning the power OFF

Follow the procedure below to turn the printer OFF.

Verify the following regarding the operational condition of the product.

•	Printing or other operations are not in progress.
•	The operation panel display is Normal.

Press the [Power] key on the operation panel to turn OFF the printer.

•

If the operation panel is in the following status, the power is ON.

•	The [Power] key is pressed in.
•	The Power lamp lights up in green.

Press the key once again to turn OFF the power.

$graphics\VJ1204P013J.gif$

•	"CR Mainte.: Start" is displayed on the operation panel.

Press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	Maintenance starts.
•	The print head moves to the left.
•	The cleaning wiper moves forward.
•	"CR Maintenance: Wiper End" is displayed on the operation panel.

4	Clean the cleaning wiper unit. $graphics\nzilg007.gif$ 6.2.4.1 Cleaning the cleaning wiper unit

Clean around the print head.
$graphics\nzilg007.gif$ 6.2.4.2 Cleaning around the print head

•	Press the [Cancel] key if cleaning the cleaning wiper unit and around the print head is not performed.

After cleaning is completed, press the [Enter] key on the operation panel.

$graphics\VJ1204P004J.gif$

•	The cleaning wiper returns to its original position.
•	The print head returns to its original position.
•	The printer starts the procedure to turn the power OFF.
•	"Power Off" is displayed on the operation panel.
•	All the lamps on the operation panel and the LCD monitor are turned OFF.
•	The printer automatically turns the power OFF.

•	If there is a problem during turning OFF operation, a message is displayed on the operation panel and the printer may stop operating. If operation stops, refer to "7 Troubleshooting " and deal with the problem.
•	After turning OFF the printer, wait for 10 seconds or longer to turn it ON again.

Raise the media loading lever when the product is not used for a long time.

$graphics\VJ1608A301A.gif$

No.

Name

Media loading lever