5.5 Selection menu

Sets up the contents of the Setup menu.
You can make setup items that you do not normally use invisible.
Switch the setting "On (displayed)" to "Off (undisplayed)" using the [<] key or [>] key on the operation panel.
When the setting is On, "*" is displayed on the operation panel.

•Even if you select "Off" in the Selection menu, you can display the settings temporarily by selecting "Temporary" in the Setup menu.
graphics\nzilg007.gif5.1 Setup menu
•The following items are never displayed even when "ALL On" is selected.
•Feed unit
Setup item
Setting
Description
MediaType
<On>
Sets up whether to display the MediaType menu.
Off
Effect
<On>
Sets up whether to display the Effect menu.
Off
Flushing
<On>
Sets up whether to display the Flushing menu.
Off
Side Margin
<On>
Sets up whether to display the Side Margin menu.
Off
Media Initial
<On>
Sets up whether to display the Media Initial menu.
Off
Media Width
<On>
Sets up whether to display the Media Width menu.
Off
Take-up
On
Sets up whether to display the Winding unit menu.
<Off>
Feed unit
<Off>
The feed unit menu is not displayed in this printer.
Origin
<On>
Sets up whether to display the MediaType menu.
Off
Prev. Stick
<On>
Sets up whether to display the Prev. Stick menu.
Off
Dummy Shuttle
<On>
Sets up whether to display the Dummy Shuttle menu.
Off
CR Movement
<On>
Sets up whether to display the CR Movement menu.
Off
OverwriteCnt
<On>
Sets up whether to display the Overwrite Cnt menu.
Off
Overwrite Wait
<On>
Sets up whether to display the Overwrite Wait menu.
Off
Slant Check
<On>
Sets up whether to display the Slant Check menu.
Off
Auto Cleaning
<On>
Sets up whether to display the Auto Cleaning menu.
Off
Ink Status
<On>
Sets up whether to display the Ink Status menu.
Off
Roll Length
<On>
Sets up whether to display the Roll Length menu.
Off
Head Wash
<On>
Sets up whether to display the Head Wash menu.
Off
CR Maintenance
<On>
Sets up whether to display the CR Maintenance menu.
Off
Initialization
<On>
Sets up whether to display the Initialization menu.
Off
Life Times
<On>
Sets up whether to display the Life Times menu.
Off
IP Address
<On>
Sets up whether to display the IP Address menu.
Off
Subnet Mask
<On>
Sets up whether to display the subnet mask.
Off
Gateway
<On>
Sets up whether to display the Gateway menu.
Off
BtmInterlace
<On>
Sets up whether to display the BtmInterlace menu.
Off
ALL On
Displays all items in the Setup menu.
•Pressing the [Enter] key displays "*" for all items in the Selection menu.
ALL Off
No items in the Setup menu are displayed.
•Pressing the [Enter] key deletes "*" for all items in the Selection menu.
•Even if you select "ALL Off", you can display the items temporarily by selecting "Temporary" in the Setup menu.

—
•[Cancel] key: saves the setting and shifts to the previous menu.
graphics\nzilg007.gif5 Panel setup menu