When the set media is jammed, follow the procedure below to remove it.

1	Turn OFF the power of the printer. $graphics\nzilg007.gif$ 3.2.2 Turning the power OFF

Open the front cover.

$graphics\VJ2606A700A.gif$

No.

Name

Front cover

Move the print head section from the top of the media to the right.

$graphics\VJ2606A701A.gif$

No.

Name

Print head section

Roll media

Raise the media loading lever.

$graphics\VJ2606A702A.gif$

No.

Name

Media loading lever

5	Turn the unit ON. $graphics\nzilg007.gif$ 3.2.1 Turning the power ON

Pull the media to your side, and cut the torn part with cutting tools such as a razor blade.

$graphics\VJ2606A703A.gif$

No.

Name

Razor blade

Roll media

Display the Manual reel menu on the operation panel.

Press the [Menu] key on the operation panel.

$graphics\VJ1204P001J.gif$

•	"Menu 1: Setup>" is displayed on the operation panel.
•	The operation panel shifts to the Setup menu display.

Press the [+] key or [–] key to select "Menu6: Manual Reel >".

$graphics\VJ1204P003J.gif$

Press the [>] key on the operation panel.

$graphics\VJ1204P008J.gif$

•	"<–Order[T-up]Reverse –>" is displayed on the operation panel.
•	The display shifts to the Manual reel menu. $graphics\nzilg007.gif$ 5.6 Manual reel menu

Press the [+] key or [–] key to select "<–Order[Feed]Reverse –>".

$graphics\VJ1204P003J.gif$

Press the [>] key on the operation panel, and wind the roll media.

$graphics\VJ2606A602A.gif$

No.

Name

Roll media

10	If paper dust or pieces of paper remain inside the printer, remove them.