|
|
Cut Commands
Commands: Velocity, Acceleration And Force
Mutoh Cutters come defaulted to 'ACCEPT' velocity, acceleration and force
commands from the host software. If your application software has the ability
to control these functions, the software will ALWAYS override the hardware
settings as long as the cutter is set to 'ACCEPT'. If your software is
capable of controlling these functions, you can usually set the parameters
for velocity, acceleration and force in the cut manager just prior to executing
the cut. If you are not sure, contact you software provider's technical support
line.
Note: While it is possible to set the Mutoh Cutter to 'IGNORE' these commands
from the software, we don't recommend it. This feature can be used
to test the cutting accuracy if you are experiencing cut quality problems.
|
