|
|
Recommendations For Materials
Although your Mutoh cutter is capable of very high cutting speeds and accelerations,
you must adjust to the material conditions. Use the following chart to help
you adjust your Mutoh cutter to the material (media) conditions.
| Media
Type |
Knife
(degrees) |
Force
(g) |
Speed
(cm/sec) |
Acceleration
(G) |
Offset
(mm) |
2 mil High Performance
Cast Vinyl |
45° |
40 - 130 |
45 - 90 |
3.0 |
0.48 - 0.58 |
3 mil Intermediate
Vinyl |
45° |
40 - 130 |
45 - 90 |
3.0 |
0.48 - 0.58 |
4 mil Calandered
Vinyl |
45° |
40 - 130 |
45 - 90 |
3.0 |
0.48 - 0.58 |
> 5.9 mil Reflective
w/o Aluminum |
60° |
50 - 100 |
10 - 60 |
0.5 - 2.0 |
0.48 - 0.58 |
> 5.9 mil Reflective
w/ Aluminum |
60° |
80 - 175 |
5 - 30 |
0.5 - 1.5 |
0.48 - 0.58 |
7.87 mil - 31.5 mil
Sandblast Stencil |
60° |
80 - 350 |
5 - 45 |
0.5 |
0.48 - 0.58 |
| Rubylith / Amberlith |
30° - 60° |
40 - 100 |
45 - 90 |
1.5 - 3.0 |
0.48 - 0.58 |
|
