|
|
Graphix Advantage Setup
After you have followed all instructions from your Graphix Advantage sales
representative try these suggestions.
If you are a Graphix Advantage user using a Mutoh XPC or SC then your serial
port and Cutter communications should be set to Mutoh "default 2".
For XPC, press 'remote' and scroll the menu looking for Communication.
Select Default 2.
For SC, Print the setup sheet and confirm that the cutter is using Default
2.Also, make sure you have selected the Embosstrack 24 or Embosstrack 48 driver,
not the RF driver.
The Cutter 's pagemode should be set to 1, and the program step size to 0.010".
|
